Plasmaspraying相关论文
...
The influence of MoS2 on tribology characteristic parameter of Ni60A/MoS2 composite lubricating coat
...
Preparation of Ni60-WC Coating by Plasma Spraying, Plasma Re-melting and Plasma Spray Welding on Sur
...
Fe-based amorphous and nanocrystalline coatings were fabricated by air plasma spraying. The coatings were further treate......
A post-treatment of hydrothermal process was conducted to evaluate its effects on the material characteristics and mecha......
To understand the effects of spray parameters on the splashing, cast iron particles were plasma-sprayed onto polished su......
Ni60-SiC Coating Prepared by Plasma Spraying,Plasma Re-melting and Plasma Spray Welding on Surface o
...
Superhydrophobic coating is widely used in the fields of self-cleaning, anti-corrosion, anti-icing, water proofing, biom......
Towards the high-speed, heavy-duty trends of Chinas high-speed train, a higher requirement for the service life of the a......
Tribology properties of plasma sprayed nanostructured and conventional WC-Co coatings under water en
WC-Co cermet has wide applications in machinery industries as a wear-resisitance coating.The fabrication of Nanostructur......
Cr2O3 coating was prepared on the surface of SiO2/SiO2 composites by plasma spraying process, and the microstructure and......
Microstructure and Wear Resistance of Molybdenum Based Amorphous Nanocrystalline Alloy Coating Fabri
...
Thermal Cyclic Oxidation Performance of Plasma Sprayed Zirconia Thermal Barrier Coatings with Modifi
...
采用超音速等离子喷涂技术与激光重熔工艺复合制备氧化锆隔热涂层,通过光学显微镜、扫描电镜、能谱仪、X射线衍射仪和硬度仪分别表......
Fabrication and Evaluation of Plasma-sprayed Functionally Gradient WCu Coatings as Plasma Facing Mat
Tungsten has been decided as the plasma facing material (PFM) for some high heat flux regions of the divertor in the......
Durable self-polishing antifouling Cu-Ti coating by a micron-scale Cu/Ti laminated microstructure de
Marine biofouling is a major issue deteriorating the service performance and lifespan of marine infrastruc-tures.The dev......
Al2O3-ZrO2-TiO2 coatings were successfully prepared by plasma spraying Al2O3-ZrO2 composite powders with and without TiO......
INTRODUCTIONrnHydroxyapatite (HA) has many biological benefits, such as direct bonding to bone and enhances new bone fo......
Al2O3-Y2O3 composite powder with TiO2 additive was plasma sprayed to prepare Al2O3-Y2O3 composite coatings.The microstru......
利用金相显微镜及扫描电镜,对铝合金上等离子喷涂的Ni、Ni/Al、Ni/Cr/Al、NiCrAlCoY-TiAl3和NiCrAlCoY-AlNi涂层的界面进行热震前......
介绍了等离子体化学热处理，阴极溅射，离子镀、离子注入和等离子喷涂等等离子体表面改性技术现代工艺方法的工作原理，研究现状，发展趋势......
在４５钢基材上用等离子喷涂方法制备了ＴｉＣ－Ｎｉ－Ｍｏ金属陶瓷涂层，对涂层进行了性能试验，ＳＥＭ分析及ＸＲＤ分析，结果表明，等离子喷涂ＴｉＣ－Ｎｉ－Ｍｏ金属陶瓷涂层组织是均匀的，涂层......
在GH635高温合金基材上等离子喷涂NiCrAlY/85Y2O3-ZrO2热障涂层，进行激光重熔，对不同激光工艺参数下的试样进行表面形貌观察并进行热......
研究了铬铸铁表面等离子喷涂Ni-Al-WC合金层及其组织性能。对喷涂层的化学成分、相组成、显微结构、平均显微硬度、耐磨性及耐蚀性......
针对氧化铝涂层的层状结构和多孔性特点，通过控制喷涂粉末的成分来实现改变涂层组织结构和提高耐蚀性。结果表明，在喷涂粉末中添加适......
介绍了等离子熔射快速制造金属注塑模的工艺方法,试制了一副带花纹的注塑模并进行了注塑试验.试验结果表明,该方法制作的模具,具有......
